From the week
Space for the part, but not for a hand
Once a rough shape model was on the desk, assembly was less convenient than it had looked on screen.
I made a rough cardboard space model while looking at a shape proposal this week. The edges were uneven and the tape conspicuous. It was only meant to make the positions of the parts easier for people beside me to see. The gaps visible on screen were there, and nothing seemed to clash.
Then I tried to remove the object inside. The part could pass through the gap, but my fingers had nowhere to grip it. A different angle and a fingernail under the edge were no more comfortable. After turning the model around for a while, I had to admit how easily I had imagined the operation at the computer.
Changing the sequence before the shape
I peeled the tape back and tried a different order: which part went in first, and which could move only after something outside it was loosened. The cardboard soon lost its shape. It was worse for discussing appearance and better for exposing the room a hand or tool needed.
Back in the digital model, the issue extended beyond geometric interference. A part might clear the opening without a usable grip, rotation space or approach for a tool. Hiding a part on screen is simple. The object in the way cannot disappear on the desk.
I did not explore every possible sequence. I kept the most obvious blocked operation, noted the direction of entry and the face that became hidden, then asked someone to start again. Their grip differed from mine, but the attempt stopped in the same place.
By the end of the discussion the cardboard was sagging. I taped the surviving seams back together instead of making a handsome replacement. The next thing to examine was still the half-disassembled state. A complete model would only need taking apart again.
After clearing the scraps and tape I noticed adhesive on the back of my hand. Washing and rubbing did not remove it all. Eventually I left it alone to loosen by itself.