Published
My feet arrived after the shuttle
The confidence I found during the badminton warm-up did not last through the first game.
Read ↗Content centre
Composites, joints and test reviews, with occasional entries from away from the workbench. Worked examples retain their assumptions in the article.
Published
The confidence I found during the badminton warm-up did not last through the first game.
Read ↗Published
Once a rough shape model was on the desk, assembly was less convenient than it had looked on screen.
Read ↗Published
I thought the drooping lamp head needed a tighter screw. Then I discovered I had remembered its assembly incorrectly.
Read ↗Published
Trace zero direction and local material axes from the model into the drawing, build record and inspection plan.
Read ↗Published
A worked arm-revision record that keeps the failed first test and the mass target that remained open.
Read ↗Published
A layup comparison with fixed hole geometry, edge distance, restraint and load direction.
Read ↗Published
How an overlap revision changes the analysis input, process record and test stop conditions.
Read ↗Published
Two nominally identical checks become non-comparable when the clamped length moves by 20 mm.
Read ↗Published
Photographs, load traces and section locations are more useful than an early material-failure label.
Read ↗